Comutech 100603 / HB-1208CS Manual De Usuario página 16

1/ Select voltage : 6 volt / 12 volt.
2/ Select power of charge : Fast / Low.
3/ Place the red clip to the positive terminal of the battery (indicated with "+")
4/ Place the black clip to the negative terminal (indicated with "-").
5/ Plug in power source 220vlt.
6/ The battery will then start charging.
13. IMPORTANT DETAILS
- Unit must operate from AC 230V supply
- The red clip and black clip should not touch during charging to avoid short circuit..
- Place the charger in well ventilated and dry location.
- For in door use only.
14. QUICK VIEW :
- Float charging,
- Reverse connect protection,
- Short-circuit protection,
- Thermal Fuse inside protection,
- Over-charged protection,
- Indication of charging:
- 1.7M power cable with plug, 1.4M output cable with clips.
Indication of charging
Switch 6v / 12 v
Switch Fast/Low
1- Positive clamp (+) red
2- Négative clamp (-) black
16