Steelcase 488 Brody Manual Del Usuario página 21

®
Top Trim Replacement (continued)
NOTE: To avoid damaging product, identify type
of top cap retainer in use and refer to appropriate
top cap retainer seating method shown.
4.
Place top caps between screen and base
unit. Locate compression dowel or threaded
stud top cap retainers over holes or clips in base
unit. Lightly press down to initially engage all
retainers into the base unit.
NOTE: Whether seating top cap with nylon block
and mallet, or by hand, always apply seating force
with caution, directly over each top cap retainer.
5.
Applying appropriate method shown, completely
seat top caps by working your way outward from each
side of the third leg bracket towards each end of the
top cap.
You are complete once you level the
glides, inspect & clean the unit!
COMPRESSION DOWEL
SEATING METHOD
MALLET
NYLON BLOCK
4
THREADED STUD
SEATING METHOD
5
TOP CAP
Page 2 of
113157