Connect The Tool; View Codes/Data Types - OTC PocketScan 3108N Manual Del Usuario

Connect the Tool

To connect the Tool to the vehicle:
1. Locate the vehicle connector under the steering column.
If the connector is not there, a label should be there indicating
the whereabouts of the connector.
2. If necessary, remove the cover from the vehicle connector.
3. Turn the ignition switch to the ON position. Do not start the
engine.
4. Plug the Diagnostic Connector attached to the Tool into the
vehicle connector.
The Tool automatically reads ALL
the data from the vehicle then displays the
Main Menu.

View Codes/Data Types

To view the codes or data types:
1. From the Main Menu, press the READ or ERASE arrow key
until the desired code or data type (Codes, Live Data, MIL Status,
I/M Monitors, Freeze Frame, or VIN) is visible, then press the
ENTER key to display the results for that data type:
2. Press READ or ERASE to scroll
through the codes and data.
3. Press ENTER to return to the Main Menu selection screen.
1) Codes
P0183 Pnd Mod00
 Fuel Temperature
6
Main Menu 