Publicidad
Idiomas disponibles
Idiomas disponibles
Always use hoses, lubricating oil and antifreeze lubricants, which meet the local safety
requirements for use in areas exposed to explosion hazards.
Connecting the air supply to the pneumatic band saw.
Remove the locking cap from the air connection 3 (see fig. 3). Connect the pneumatic hose
(not contained in the scope of delivery).
Transport and installation
Observe the safety instructions for avoiding transport hazards!
•
Preparation for the transport: Insert the locking pin item 12 into the opening on the swivel
support item 11.
•
Ensure that the installation surface is adequately stable and that there is sufficient light.
Indication regarding the saw blade
Selection of saw blade: In general, at least two teeth of the saw blade have to be engaged in
the material.
This means, the thinner or harder the material is, the finer the graduation of the saw blade.
Fig. 3
USE
Fig. 4
55
Publicidad
