Intended Use; General Safety Rules - Ryobi RBC430SESC Manual De Utilización

WARNING: To reduce the risk of injury, the user
must read and understand the operator's manual
before using this product.
SAVE THIS MANUAL FOR FUTURE
REFERENCE
Yo u r b r u s h c u t t e r h a s b e e n e n g i n e e r e d a n d
manufactured to our high standard for dependability,
ease of operation, and operator safety. Properly
cared for, it will give you years of rugged, trouble-free
performance.

INTENDED USE

This product is only intended for use outdoors in a well
ventilated area.
The product is intended for cutting long grass, pulpy
weed, or brush and similar vegetation at or about ground
level. The cutting plane should be approximately parallel
to the ground surface. The product should not be used
to trim hedges, bushes or other vegetation where the
cutting plane is not parallel to the ground surface.

GENERAL SAFETY RULES

WARNING:
Read and understand all instructions. Failure to
follow all instructions listed below may result in
serious personal injury.
READ ALL INSTRUCTIONS
instructions before using this product. Follow
all safety instructions. Failure to follow all safety
instructions listed below can result in serious
personal injury.
this unit.
ventilated area; breathing exhaust fumes can kill.
objects such as rocks, broken glass, nails, wire, or
string which can be thrown or become entangled in
the cutting line or blade.
that are marked to comply with EN 166 standard
when operating this product.
not wear loose fitting clothing, shorts, sandals, or go
barefoot. Do not wear jewellery of any kind.
fatigue, which could lead to heat stroke. During
English(Original instructions)
a) Keep your body warm in cold weather. When
b) After each period of operation, exercise to increase
c) Take frequent work breaks. Limit the amount of
If you experience any of the symptoms of this condition,
immediately discontinue use and see your physician
about these symptoms.
16
weather that is hot and humid, heavy work should be
scheduled for early morning or late afternoon hours
when temperatures are cooler.
protection is advised.
entanglement in moving parts.
tools may contribute to a condition called Raynaud's
Syndrome in certain individuals. Symptoms may
include tingling, numbness and blanching of the
fingers, usually apparent upon exposure to cold.
Hereditary factors, exposure to cold and dampness,
diet, smoking and work practices are all thought to
contribute to the development of these symptoms. It
is presently unknown what, if any, vibrations or extent
of exposure may contribute to the condition. There
are measures that can be taken by the operator to
possibly reduce the effects of vibration:
operating the unit wear gloves to keep the hands
and wrists warm. It is reported that cold weather is a
major factor contributing to Raynaud's Syndrome.
blood circulation.
exposure per day.
away. Bystanders should be encouraged to wear eye
protection. If you are approached, stop the engine
and cutting attachment. In the case of bladed units,
there is the added risk of injury to bystanders from
being struck with the moving blade in the event of a
blade thrust or other unexpected reaction of the tool.
under the influence of alcohol, drugs, or medication.
Overreaching can result in loss of balance or
exposure to hot surfaces.
part.
bottom of the engine above waist level.
the unit, these parts get very hot during operation.
lead before making any adjustments or repairs
except for carburettor adjustments.