Optional Accessories (Sold Separately); Battery Removal/Installation - HIKOKI CR18DMR Instrucciones De Manejo

OPTIONAL ACCESSORIES (sold separately)

1. Battery (EB1820L, EB1824L, EB1826HL, EB1830HL,
EB1830X, EB1833X, EBM1830)
2. Blades
(1) No. 1 Blade
(2) No. 2 Blade
(3) No. 3 Blade
(4) No. 4 Blade
(5) No. 5 Blade
(6) No. 8 Blade
(7) No. 9 Blade
(8) No. 95 Blade
(9) No. 96 Blade
○ (1) – (9) : HCS Blades (HCS : Highspeed Carbon Steel)
○ (10) – (20) : Bl-METAL Blades
Refer to Table 3, 4 and 5 for use of the blades.
Optional accessories are subject to change without notice.
APPLICATIONS
○ Cutting pipe and angle steel.
○ Cutting various lumbers.
○ Cutting mild steel plates, aluminum plates, and copper
plates.
○ Cutting synthetic resins, such as phenol resin and vinyl
chloride.
For details refer to the section entitled "SELECTION OF
BLADES".

BATTERY REMOVAL/INSTALLATION

CAUTION
Be sure to keep the switch turned off and the lock-off
button moved to right position (lock position) (See
Fig. 18).
1. Battery removal
Hold the housing tightly and push the battery latches to
remove the battery (see Figs. 1 and 2).
CAUTION
Never short-circuit the battery.
2. Battery installation
Insert the battery while observing its polarities (see
Fig. 2).
(10) No. 101 Blade
(11) No. 102 Blade
(12) No. 103 Blade
(13) No. 104 Blade
(14) No. 105 Blade
(15) No. 106 Blade
(16) No. 107 Blade
(17) No. 108 Blade
(18) No. 121 Blade
(19) No. 131 Blade
(20) No. 132 Blade
CHARGING
〈UC24YFA, UC18YRL〉
Before using the power tool, charge the battery as follows.
1. Connect the charger's power cord to a receptacle
When the power cord is connected, the charger's pilot
lamp will blink in red (At 1-second intervals).
2. Insert the battery into the charger
Insert the battery fi rmly, until it contacts the bottom of
the charger compartment.
CAUTION
○ If the battery is inserted in the reverse direction, not
only recharging will become impossible, but it may
also cause problems in the charger such as deformed
recharging terminal.
3. Charging
When inserting a battery in the charger, charging will
commence and the pilot lamp will light up continuously
in red.
When the battery becomes fully recharged, the pilot
lamp will blink in red (At 1-second intervals) (See
Table 1).
(1) Pilot lamp indication
The indications of the pilot lamp will be as shown in
Table 1, according to the condition of the charger or the
rechargeable battery.
English
10