Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
•
Get an empty USB drive with maximum capa-
city of 8GB. Format it in FAT 32.
•
Save into the USB drive the updated program.
Ensure unit is powered off and unpluged
from the mains.
•
Insert the USB drive into the USB connector -
C - on the front or in the internal panel of the
power source.
•
Plug the unit to the mains and switch it ON
holding MODE key - 16 -.
•
In the displays an ID code can be read, then
Mode Key - 16 - can be released. The unit
turns OFF and restart automatically once
update is completed.
•
Remove the USB drive.
•
16
Figure 21 - Firmware Update
18
FIRMWARE UPDATE
DEFAULT DATA FORMATTING
•
•
•
•
•
After the firmware update ensure unit is OFF.
Press keys - 16 - and - 17 - at the same time
and hold them.
Turn ON the unit by holding the two keys.
Keep the keys hold for 10''.
Release the key and default data formatting
is completed.
Publicidad
Tabla de contenido
