Customer Service; Ce Declaration Of Conformity; Contact Information - MAC TOOLS MPH1911 Manual De Funcionamiento Y Mantenimiento

LIMITED WARRANTY
We warrant that this tool shall be free from manufacturing defects for a period of TWO YEARS from the original
purchase date. Our obligation to the original purchaser shall be limited to repairing or replacing, at our expense
(not including shipping charges) a defective tool if returned by the original purchaser within two years from the
date of purchase, all incoming shipping charges prepaid. THIS WARRANTY DOES NOT COVER DEFECTS OR
DAMAGES TO THE TOOL (i) after the warranty period expires; (ii) resulting from misuse or abnormal operation;
(iii) resulting from a failure to properly lubricate, maintain or operate the tool; or (iv) resulting from any repair
or maintenance services performed by any party other than Mac Tools. THIS LIMITED WARRANTY IS GIVEN IN
LIEU OF ALL OTHERS, INCLUDING THE IMPLIED WARRANTY OF MERCHANTABILITY AND FITNESS FOR A
PARTICULAR PURPOSE, AND EXCLUDES ALL INCIDENTAL OR CONSEQUENTIAL DAMAGES. Some states
do not allow limitations on how long an implied warranty lasts or the exclusion or limitation of incidental or
consequential damages, so these limitations may not apply to you. This warranty gives you specific legal rights
and you may have other rights which vary in certain states or provinces.

CUSTOMER SERVICE

We at Mac Tools are committed to our customers, please reference the following phone number for a direct
contact to one of our customer technicians. They will be more than happy to help with any service or warranty
questions you may have about your power tool.
MACTOOLS.COM Mac Tools • 505 North Cleveland Avenue • Westerville, Ohio 43082
Mac Tools-Europe, Stanley Black & Decker Inc. • Unit 3, Europa Court
Sheffield Business Park • Sheffield, S9 1XE
WE, MAC TOOLS EUROPE-STANLEY BLACK & DECKER, INC. EUROPA COURT, SHEFFIELD
BUSINESS PARK, SHEFFIELD S9 1XE, UNITED KINGDOM, DECLARE UNDER OUR OWN
RESPONSIBILITY THAT THE PRODUCTS MPH1911 – LONG BARREL .401 IN SHANK AIR HAMMER
AND MPH1931 – SHORT BARREL .401 IN SHANK AIR HAMMER
- IS IN CONFORMITY WITH THE "MACHINERY" DIRECTIVE 2006/42/EC
- AND IS IN CONFORMITY WITH THE PROVISIONS OF THE HARMONISED
EUROPEAN STANDARD EN ISO 11148-4: 2012
THE UNDERSIGNED IS RESPONSIBLE FOR COMPILATION OF THE TECHNICAL FILE AND MAKES
THIS DECLARATION ON BEHALF OF MAC TOOLS.
12

CE DECLARATION OF CONFORMITY

800.MACTOOLS
0114 2917266
Markus Rompel
Director Engineering
20.03.2016
Manual #N495046