Assembly & Installation; Identify The Model Of Tractor - MTD 19A30003OEM Manual Del Operador

Assembly & Installation

Identify The Model of Tractor

This bagging system is designed for use on several different
tractor models. Prior to attempting to mount the bagger, it is
important to determine which model of tractor that you have.
To identify your tractor's model, simply pivot the seat upward
and locate the model plate on its underside. The model number
will consist of a combination of eleven number and letters.
The 5 , 6 & 7 digits in your model number determine the
th th th
model series. For example, 13WC762F065, 13AN795S001 and
13WN77KS011 are all 700-series tractors.
700-Series Tractors Only
If you are assembling this bagger for use on any 700-series model
tractor you will need to install the two tractor mounting brackets
packed in your bagger kit. If you are installing this bagger unit on
any other tractor, disregard these steps and move to Assemble
Mounting Brackets on the next page.
To install these brackets on a model 700-series tractor, follow
these steps:
1. If not already installed by the factory, install a shoulder bolt
from your hardware pack on each bracket, securing them
with flange lock nuts also included in the hardware pack.
Refer to Figure 4-1.
2. If already installed in the brackets, remove the clevis pins
and clips, retain for later instuctions. Refer to Figure 4-1.
8
Figure 4-1
3. Mount the 700 series tractor mounting brackets to your
tractor using four self-tapping hex screws included with
your kit. See Figure 4-2.
Figure 4-2
For All Tractors:
Assemble Mounting Brackets
To assemble the bagger mounting assembly, locate the hitch
bracket kit and follow these steps:
1. Attach the right-hand and left hand rider hitch bracket
to the universal rear attachment bracket using the four
carriage bolts (710-3008) and flange lock nuts (712-04063)
packed with the mounting brackets. Position the brackets
with the hooks on the right-hand and left hand rider hitch
bracket pointing downward, and the tabs on the universal
rear attachment bracket pointing upwards. See Figure 4-3.
Figure 4-3
4
Universal Rear
Bracket
Hitch Side
Bracket