Setting Up The Camera; Power On/Off; Turning On Your Camera - Angelcare AC417 Manual De Usuario

STEP 3 ‑ SETTING UP THE CAMERA
3.1 ‑ SELECT A LOCATION FOR THE CAMERA
Camera can be installed on the wall (see included parts) or using the tabletop stand. Depending on
the position you choose, you'll need to remove the metal ball from the stand to wall mount camera.
Note: Each time you power ON your Camera, the internal thermometer will need to
calibrate to ensure accuracy. This automatic process will take approximately 30 minutes.
The colour changing temperature display, by default, will be turned "OFF". You may turn
this feature "ON" in the settings mode on your Parent Unit.
CAMERA
STEP 4 ‑ TURNING ON YOUR MONITOR

4.1 TURNING ON YOUR CAMERA

ON
1
66
2
Front Side
OFF
1) Slide the Camera ON/OFF switch to the ON position.
Place the
Camera at least
1 metre from the
cot
1) Place the Camera at a minimum of
1 metre away from the cot.
2) Connect the adapter to the Camera
and into an electrical outlet.
Pause Sensor Pad/
Pairing button
Speaker
Microphone
Camera
Room
temperature
display
Micro USB
charging port

POWER ON/OFF

Magnet for
Rear Side tabletop stand
and wall mount