Inserting The Battery; Operations - Bissell HARD FLOOR EXPERT 2001 Serie Guia Del Usuario

Inserting the Battery

WARNING
Before using your vacuum, make sure that the dirt container is in locked position and
that all filters, both pre and post-filters are in place. DO NOT operate your vacuum without
these filters.
1
Push the battery firmly into the body
of the vacuum .
Adjusting the Variable Suction
1
Turn the product on by pressing the on/off button.
The vacuum has 3 power levels that can be changed
by twisting the on/off button. The power levels are
indicated by 3 LEDs and symbols showing curtains
for low power mode, flooring for medium power
mode and 'MAX' for full power.
NOTE: In low power mode, the brush roll will not rotate.
6
www.BISSELL.com
2
Align the tabs on bottom of battery door
and push in until you hear a "click."
2
The hard floor turbine tool
can be used across all types
of hard surface.