Troubleshooting - Bissell Flip-it 5200 Serie Guia Del Usuario

Storing The Flip-It
Your Flip It can be stored Ready-to-Use, by leaving water
and formula in the unit. Be sure to remove wet Gentle
Clean™ Pad before storing.

Troubleshooting

Water & Formula are draining out from the clean tank
Possible Causes
Clean Tank Black Cap & Valve are not on tight
1
Clean Tank Black Cap & Valve are cross threaded
2
No suction
Possible Causes
Filter may be dirty or clogged
1
Wet vacuum nozzle may not be on properly
2
Tank is full
3
Water is not flowing
Possible Causes
Something is caught and clogging the air path
1
Clean Tank is not inserted properly
2
10
Tip:
If the Pleated Filter is rinsed
with warm water to clean,
it is recommended to leave
it out of the unit to air dry
before placing it back in
the unit.
Remedies
Remove Black Cap & Value
1
and attach tightly
Remove Black Cap & Valve
2
and make sure it is
screwed on straight
and tightly
Remedies
Remove filter from the Dirty
1
Tank and clean
Make sure Wet Vacuum
2
Nozzle is on tight and
snapped into place
Empty Tank
3
Remedies
Unplug unit. Remove Wet
1
Clean Nozzle and insert a
blunt object into the
air path to remove any
potential clog
Remove Tank and reinsert
2
into the unit
WARNING:
To reduce the risk of
fire, electric shock or
injury unplug from outlet
before servicing.