Axor Starck 10651XX1 Manual Del Usuario página 4

1
2
1.
3
1.

2.
2.
English
Installation
Cut the plaster shield so that it extends ¹⁄₁₆" outside
the surface of the finished wall.
Seal the wall around the plaster
shield with waterproof sealant (1).
Failure to seal the wall can lead to
possible water damage.
Install the slip connector (2).
Cut the slip connector so that it extends ⅜" - ½"
outside the surface of the finished wall (1).
Install the extension spindle (2).