Changing The Network Configuration - Conceptronic CH3ENAS Manual De Instrucciones

ENGLISH
If the date & time are not correct, you can use the settings on this configuration page to modify the date & time
to the correct settings.
 Select if you want to configure the date & time "Manually" or "Automatically".
When you select to configure the date & time "Manually", you need to set the date & time in the „Current date &
time‟ section to the correct values.
 Click "Select" to popup a calendar to select the correct date.
 Use the dropdown menus to select the correct time.
 Click the "Apply" button in the „Current date & time‟ section to save the manual date & time settings.
When you select to configure the date & time "Automatically", you need to select the correct timezone from the
time zone dropdown menu.
 Set the daylight savings to "Enable", or "Disable", depending on your current daylight savings condition.
 Select one of the predefined time servers, or add a new time server.
 Click the "Apply" button in the „Change date & time‟ section to save the automatic date & time settings.
If the date & time settings are correct, you can proceed to chapter 4.3.2 to change the network configuration.

4.3.2 Changing the network configuration

 Select "GENERAL" in the top bar of the configuration page.
 Select "NETWORK" in the left bar of the configuration page.
The „NETWORK‟ configuration will be shown on your screen:
32