Setting Up The Hard Disk - Conceptronic CH3ENAS Manual De Instrucciones

ENGLISH

4.3.3 Setting up the hard disk

When you are configuring the Home Media Store for the first time, you need to set up the hard disk before you can
store data on the Home Media Store.
 Select "TOOLS" in the top bar of the configuration page.
 Select "HDD CONFIGURATION" in the left bar of the configuration page.
The „HDD CONFIGURATION‟ configuration will be shown on your screen:
In the „HDD CONFIGURATION‟, you can see the status and change the configuration of the hard disk inside the
Home Media Store. You can also see the status of USB connected storage devices.
To format your hard disk inside the Home Media Store, click the "Format" button behind the hard disk in the
„Available Volumes‟ section. The Home Media Store will ask for a confirmation before the format is started.
Warning: Any existing data on the hard disk(s) of the Home Media Store will be erased when you select a hard
disk configuration and format the hard disk(s).
When the format is finished, the Home Media Store will show a notification popup telling that the format is
completed.
Once the hard disk is formatted, the Home Media Store creates a shared folder called „Public‟, which can be
accessed by anyone in your network.
 To start using the „Public‟ share on the Home Media Store without creating additional users and shares,
continue to chapter 5.
 If you want to create additional users and shares with user rights, continue to chapter 4.3.4 to start
creating users for the Home Media Store.
34