FINO FORNO S Manual Del Usuario página 16

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Version 1/2010. Read the user manual before you start operating the unit!
TABLE OF CONTENTS
1. General
• Information about this user manual • Explanation of symbols • Limitation of liability
• Copyright protection • Spare parts • Warranty information • Customer service
• Responsibility of the user • Staff requirements • Proper use • Personal protective equipment
• Specific hazards • Measures in case of hazards and accidents • Labelling
• General information • Connection values • Operation conditions • Type label
• Overview • Assembly description • Connections • Danger areas • Control elements
• Safety information for transport • Symbols on packaging • Transport inspection
• Packaging • Transport
• Installation • Safety • Installation • Connection to mains supply • Initial operation
• Safety • Loading of furnace • Switch on furnace • Programming • Select program
• Start program • Start program automatically • Temperatur stepping • Switch off
• Safety • Malfunction indications • Table of malfunctions
• Safety • Maintenance schedule • Maintenance work
• Safety • Disassembling • Disposal • Disposal according to EC directive 2002/96/EC
2
1. General
1.1 Information about this user manual
This user manual enables the safe and efficient
operation of the unit.
The manual is part of the unit and must be kept in the
direct vicinity accessible by the personnel at all
times. The personnel must carefully read this manual
and must have understood it before any operation
may commence. The basic requirement for a safe
3
operation is the observance of all given safety pre-
cautions and operational information in this manual.
Furthermore the local accident prevention regulati-
ons and the general safety regulations for the field of
application of this unit apply.
Pictures in this user manual are meant for the basic
4
understanding and may differ from the actual design
of the unit. Apart form this manual the user directions
of the integrated components that are attached in the
appendix apply.
7
1.2 Explanation of symbols
Safety precautions
8
In this user manual safety precautions are
indicated by symbols. The safety precautions com-
mence with signal words, which express the scope of
the risk. To avoid accidents, personal injuries and
13
tangible damage unconditionally observe safety
precautions.
Tips and recommendations
14
NOTE!
Points out helpful tips and recommendations as well
16
as information for an efficient and trouble-free
operation.
Specific safety precautions
22
To highlight specific risks the following symbols are
used in safety precautions:
DANGER! Risk of fatal injury from
electrical current!
Indicates perilous situations caused by electric
24
current. If the safety precautions are not observed
there is the risk of serious injuries or death.
25
DANGER!
!
Indicates an imminently dange-
rous situation, which might be
fatal or might lead to serious
injuries if not avoided.
CAUTION!
!
Indicates a possibly dangerous
situation, which might cause minor
or slight injuries if not avoided.
CAUTION!
!
Indicates a possibly dangerous
situation, which might cause minor
or slight injuries if not avoided.
CAUTION !
Indicates a possibly dangerous
situation, which might lead to
tangible damage if not avoided.
1.3 Limitation of liability
All information and references in this user manual
were compiled taking into account the valid stan-
dards and regulations, the state of technology as
well as our knowledge and experience of many
years. The manufacturer does not assume liability for
damages due to:
• Non-observance of the user manual
• Any use not according to specifications
• Operation by non-trained personnel
• Arbitrary alterations
• Technical alterations
• Use of non-certified spare parts
ENU
3

Publicidad

Capítulos

Tabla de contenido
loading

Productos relacionados para FINO FORNO S

Este manual también es adecuado para:

Forno l4318643187

Tabla de contenido