Solar 1850 Manual Del Usuario página 9

case, verify manufacturer's charging system specifications to confirm that the
system is not performing properly.
5. If your charging system test results in a Red (BAD) result, check belts and
alternator connections, including ground connection.
Starting System Test: Model Nos. 1850 and 1860
(12 Volt Starting Systems Only)
1. Connect the positive (red) clamp to the positive (POS, P, +) battery post.
Connect the negative (black) clamp to the negative (NEG, N, -) battery post.
DO NOT press "ENTER" on Model No. 1860 or the load switch on Model
no.1850
2. Disable the vehicle's ignition system so the car will not start.
3. Crank the engine and note the voltage reading during cranking.
4. A meter reading of ≤ 9V indicates excessive current draw. This result may be
due to bad battery connections, may indicate a failing starter motor, or may
result because the battery is too small to meet the vehicle's requirements.