Installing The Tv On The Wall; Kd-77Ag9 - Sony SU-WL450 Información De Instalación

Installing the TV on the wall

KD-77AG9

1
Lift the TV.
 For the location of the Pulleys  to the
hang on the Base or Base Adaptor, refer
to the table of step 3 in "Deciding on the
installation location" on page 7.
 Make sure that the rear of the TV
touches the Base or Base Adaptor when
holding the TV.
Note
 Hold the TV securely with both hands and make sure
the Belt  and the bottom of the TV align with the
masking tape.
 Carry the TV with three people and the person who is
in front of the TV leads the others to adjust the
position.
 Take great care when installing the TV to the wall
especially for the person who is supporting the TV
from below, the television set may fall, causing
serious bodily injury or even death.


− 12 (GB) −
2
Install the TV onto the Base or
Base Adaptor.
 Gently slide down the TV and hang the
Pulleys  attached to the rear of the TV
to the Base or Base Adaptor, making
sure to confirm the shape of the holes.
 After installing the TV on the wall,
confirm the Pulleys  are firmly latched
into the Base or Base Adaptor.
 Release both hands slowly to ensure
that the TV does not fall.
 After installing the TV on the wall,
remove the masking tape, etc. from the
wall.