Cleaning; Storage; Reset Heater - Vornado VH200-EU Manual Del Usuario

CLEANING

Because your heater moves a substantial amount of air, it will need regular cleaning. Cleaning the outside of the heater is recommended
on a bi-weekly basis. If service is required, return to the Authorized Service Center. See WARRANTY for instructions.
1. Unplug heater before cleaning.
2. Use brush attachment on
household vacuum cleaner to
vacuum any accumulated dust
off the Front Outlet Grill.
10 English

STORAGE

During the off-season or after extended periods of non-use, you may
choose to store your heater. To ensure long life of the product, it is
recommended to store your heater by following these instructions:
You may also clean the heater
with high-pressured air, as well. Cleaning is recommended before storage.
1. Unplug power cord and
bundle loosely.
3. Use brush attachment on
household vacuum cleaner to
2. Cover, or place back in retail
vacuum any accumulated dust
carton if available. This prevents
off Air Inlets on back and sides of
heater from accumulating dust
heater.
over time.
4. Wipe down the entire heater with
3. Store heater in cool and
a soft cloth.
dry location.
DISPOSAL
Dispose of all packaging
materials in an environmentally
responsible manner.

RESET HEATER

RESETTING YOUR VORNADO HEATER
Your Vornado Heater has a multilevel safety shut-off system designed
to prevent overheating. Overheating may occur when the inlets or
outlet are blocked. If this happens, the safety shut-off system cuts
power to the heater and you must manually reset the heater.
1. Power heater off, then unplug power cord.
2. Remove any obstructions.
3. Wait 5–10 minutes, allowing heater to cool down.
4. Plug in power cord and place heater in desired position.
5. Press Power button On. Your Vornado Heater should now
function normally.
Note: If the safety shut-off system
repeatedly shuts off your heater or if it
will not reset after following the above
procedure, DO NOT ATTEMPT TO
DISASEMBLE THE UNIT.
English
11