Tripp-Lite AGPD7989 Serie Manual Del Propietário página 4

2. Features
A
15-04-184-93341C.indb 4
SNMP Card Ports:
PS/2 Port: Use this port to connect a Tripp Lite
ENVIROSENSE environmental sensor to provide remote
temperature/humidity monitoring and a dry contact interface
to control and monitor alarm, security and telecom devices.
Visit www.tripplite.com for ordering information.
Note: Do not connect a keyboard or mouse to this port.
Mini-DIN Serial Port: Use this port to provide a direct
terminal connection to a computer with a terminal emulation
program. A serial cable (part number 73-1025) is included
with the PDU. If you need to order a replacement cable, visit
www.tripplite.com.
Ethernet Port: Use this RJ-45 jack to connect the PDU to
C
the network with a standard Ethernet patch cable. The
B
Status LED
A
conditions, as shown in the table below. This port is not
compatible with PoE (Power Over Ethernet) applications.
Network Operating Conditions
Status LED Color
A
Off
Steady Green
Flashing Amber
Link LED Color
B
Off
Flashing Amber
Flashing Green
SNMP Reset Button: The SNMP reset button
in a small opening between the Link and Status LEDs. To
reset your SNMPWEBCARD, use a small tool to press the
reset button for 3 seconds. Rebooting the network card will
not erase network settings or interrupt AC power.
and Link LED indicate several operating
B
Card Not Initialized
Card Initialized and Operational
Error - Card Not Initialized
No Network Connection
100 Mbps Network Connection
10 Mbps Network Connection
4
is recessed
C
4/16/2015 8:49:09 AM