MC-521-E_A_M_main.book Page 9 Tuesday, March 26, 2013 2:41 PM
3. Using the Unit
3.
Press the START button.
The measurement is complete in 1 second with a long beep.
The display will light up and the " " symbol will flash for 5 seconds.
Note: You can take another measurement after the display light turns off with 2 beeps. Make
sure " " symbol remains lit.
4.
Remove the unit from the ear and check the measurement
result.
Note:
• If your measurement result is over 37.5°C (99.5°F), the buzzer will beeps three times after a
long beep.
• After each Ear Measurement, the unit needs 5 seconds to be ready for next measurement. During this 5
seconds waiting time, the ear icon will be flashing and Backlight will light.
5.
Press and hold the ON/MEM button until "OFF" appears on the display to
turn off the unit.
The unit automatically stores the measurement in it's memory.
It will automatically turn off after 1 minute.
EN
9