Monster Power 100 Manual De Usuario página 3

Requirements
Broadband connection
In order to connect the Monster Remote Access RF/IP Card 100 to the Internet,
a broadband Internet connection will be required in the same facility as the
PowerCenter to be connected. Contact your local broadband connectivity provider
to arrange for a connection to be installed if you do not have an Internet connection.
IP infrastructure
The Monster Remote Access RF/IP Card 100 requires the following facility
IP (Internet Protocol) infrastructure:
• Broadband router or modem/router with available Ethernet connection
(10 Megabits/second or better) on RJ-45 jack. Any home broadband router
available in most electronic stores or provided by your broadband provider
will work. Some enterprise class routers may require further configuration,
refer to Appendix A for information in such situations.
• DHCP (Dynamic Host Configuration Protocol) enabled in the router with
IP Gateway and DNS (Domain Name System) server information must be
configured. Any home broadband router will already have this service available.
Some enterprise level routers will require configuration to enable this service.
ENGLISH