Ethernet Connection; Wireless Connection - Monster Power 100 Manual De Usuario

ENGLISH
Connection Installation
Depending on the connectivity option chosen, use one of the following sections
to connect the Monster Remote Access RF/IP Card 100 to the Internet.

Ethernet Connection

Connect a CAT-5 or higher rated Ethernet cable to the RJ-45 Ethernet jack on the
face plate of the Monster Remote Access RF/IP Card 100. Connect the other end of
the Ethernet cable to the broadband router or to the facility Ethernet infrastructure.

Wireless Connection

Connect the coax cable from the Antenna assembly to the coax antenna jack on
the face plate of the Monster Remote Access RF/IP Card 100. Mount the Antenna
on a suitable surface using the adhesive base. Ensure that Antenna is outside
of any metal rack or enclosure.
Install and connect the Monster Ethernet Gateway. See the installation instructions
accompanying the Ethernet Gateway for details.