Configuration - Monster Power 100 Manual De Usuario

ENGLISH
Verifying Connectivity
Connect power to the Monster PowerCenter and turn it on. The Monster Remote
Access RF/IP Card 100 will automatically attempt to connect to the Internet.
The Connection LED will turn on when the card has connected to the Internet.
If the Connection LED does not turn on within 5 seconds, there is a problem.
See Appendix B for connection troubleshooting steps.

Configuration

After verifying Internet connectivity of the Monster Remote Access RF/IP Card 100,
configure the card using the monster web site. Using a web browser on an Internet
connected PC or laptop, connect to the following URL:
http://monster.arrayent.com/
After creating a client account, click on the new account in the client list screen,
and then click on the Add/Edit/Remove Device link at the bottom. Enter the serial
code previously written down for the Monster Remote Access RF/IP Card 100 (for
example MPC12345/ABCD) and click the Add Device button. You should also enter
a location describing the purpose or location of the Monster PowerCenter.