Camera Operation - Duramaxx 10028871 Manual De Instrucciones

PW-ON Mode
This is main PW switch in the bottom of cabinet. Since the PW-SW is pushed to ON mode, the
unit will begin to warms up for 20 seconds, then start to detect motion for taking pictures/
Video. When an animal or human is detected, an event will be recorded and the camera will
shot immediately. All the detected events will be counted up to 999 events even the memory
of Digital Camera may full.
OFF Mode
Slide the PW to the center position turn the system power OFF. All pictures and current settings
will be remained at this mode and internal real time clock will still run. Note: Remember to
remove all batteries if this camera will be no longer to use.
Walk-Test (LED+DC in-use Indicator)
Both lights will be ON during the first minute of starting Walk-Test mode and Camera setting
mode. They will blink for 3 times once a walk-test motion to be detected.
In the scouting setting mode, an instant flash is response to each valid key input.
Turbo Shot
There is switch knob on the right of the scouting LCD. Push the knob to Turbo mode, the DC will
be set for fast shooting. In this mode, capture speed will be more than 2x faster than setting in
the BAT-Save while a motion is detected. Setting of BAT_SAVE will be only ideal for extending
battery life.

Camera Operation

SHOT
PREVIEW (Playback)
PIC/VIDEO
DISPLAY (Live view)
MENU (Center Key)
Navigation Disk
CAM-PW
26