Duramaxx 10028871 Manual De Instrucciones página 32

Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

Digital Zoom
When in the Preview to view a full size picture, press the UP key to Zoom In and the DOWN
key to Zoom Out for enlargoing a part of image to see more details when viewing an image.
Pan on an Image
Once you have zoomed in an image, you can pan the lens to view everywhere in an enlarged
picture by pressing LEFT or RIGHT keys.
Deleting Photos
Press MENU key under the preview mode, then highlight Delete for Single or all photos to erase
the target. Press MENU key to confirm YES / NO deletion and repeatly for deleting more.
Protect an Image or Video
During viewing an image or video which you would like to retain in the memory without wash-
out by delete processing, press MENU and highlight the LOCK option once. Then an icon with
small lock on the left top corner of this image to show it is protected. Repeat the same proces-
sing to unlock it.
All of protected items will not be deleted except you try to format the memory or the SD card.
Using an SD card
This unit does support up to 32G SDHC SD card to get a large storage capacity that allow more
than ten thousands of pictures to be saved. It will not work w/o an SD installed.
Note: Be sure the Main PW Switch is OFF before replacing a SD card in order to minimize a risk
to damage your SD card or loss data partially.
Important: If a SD card can not be inserted smoothly, you must retract it and check if
the direction of card is correct or not. Never force to push hardly with the card. Most
of case with a problem with card usage is found that caused by an improper insertion.
Warning: Before using a blank new SD card, or ever been used in other cameras, it is sugge-
sted to format it before usage.
Memory Management
In case either built-in or SD card memory is full, a memory FULL icon will be remaining blinking
on the scouting LCD. The camera will stop to shoot. Replace an empty SD card or delete some
or all contents then reboot the unit by the main Power switch to refresh the memory status.
Make sure the memory FULL icon disappear after PW up again. The camera will not resume to
work without rebooting the system.
32

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

10028872

Tabla de contenido