Charging The Batteries - Datalogic GRYPHON M Serie Guía Rápida

GRYPHON™ M

CHARGING THE BATTERIES

By placing the reader onto the OM-GRYPHON cradle or C-GRYPHON battery
charger it is possible to charge the Gryphon™ M batteries. Make sure the
charging LED goes on.
The LEDs positioned on the cradle signal the charge status, as described in the
following table:
LED
Yellow
Red
Green
Power on / Data
(yellow LED)
After many recharging cycles NiMh and NiCd batteries may tend to lose their
operating autonomy. This condition can be overcome by positioning the
Gryphon™ M onto the OM-GRYPHON / C- GRYPHON charger and pressing the
"battery reconditioning" button.
On = OM-GRYPHON is powered.
Blinking = OM-GRYPHON receives data and
Blinking = C-GRYPHON receives commands from
On = the battery charge is in progress.
On = the battery is completely charged.
Battery reconditioning
button
STATUS
commands from the Host or the reader.
the Host.
Charging
(red LED)
Charge completed
(green LED)
UK/US
3