iKEY-AUDIO iCONNEX Guía De Instalación Rápida página 2

iCONNEX
Congratulations on your purchase of the iKey Audio iConnex soundcard. This guide will help you setup the
iConnex soundcard as well as the included Audacity software. Please take the time to carefully read through
this guide as it will help you better understand how to use your new iConnex soundcard.
STEP 1: CONNECTIONS
COMPUTER HOOK UP:
First you should connect your iConnex to
your laptop or desktop computer using
the USB cable that came in the iConnex
package, making sure to connect the
smaller SQUARE end of the USB cable
to the iConnex. Then connect the other
larger FLAT end to the USB port on the
back, side or front of your desktop or
laptop computer.
INPUTS:
The iConnex can be connected to most
of your Tape, Phonograph (Turntable),
and Stereo receivers as long as they have
a phono or line level TAPE/RECORD out-
put, these INPUTS are divided into two
seperate types and both accept standard
RCA type cables (not included).
INPUT (LINE):
The line level input accepts any line level
source such as CASSETTE TAPE PLAY-
ER, DJ MIXER, CD PLAYER or even an all
in one stereo system that has a RECORD
output. You may use a standard pair of
RCA type cables to connect your stereo/
mixer/tape player to the iConnex line
input.
If your record player is
attached to a whole
stereo system you must
make sure that the
system has a RECORD, TAPE or LINE
output making sure to connect this output
using the LINE input as described above.
WARNING: DO NOT CONNECT A LINE LEVEL
OUTPUT TO THE PHONO INPUT. ALSO, NEVER
CONNECT A SPEAKER OUTPUT TO ANY INPUT
AS IT MAY DAMAGE THE ICONNEX.
USB Cable
Included
ENGLISH