Computer Setup - iKEY-AUDIO iCONNEX Guía De Instalación Rápida

iCONNEX

COMPUTER SETUP

YOUR COMPUTERS SETTINGS
Setting up your computer to work with the
iConnex is a simple task as the iConnex needs
no driver or program to work, Simply connect
the USB cable from your desktop computer or
Laptop Computer to the iConnex, and should
be ready to go. If you have a desktop computer
Please make sure that you connect the iConnex
to a USB port on the back of your computer as it
may not work with the USB input located on the
front. If you wish to check and make sure that
the settings are correct, go to your START menu
then your choose CONTROL panel. Look for the
SOUND control panel, choose it, a dialogue box
will pop up. Check and make sure that the USB
codec is chosen on both the INPUT and the
OUTPUT tabs.
After all your connections and settings are in
order you are now ready to install the Audacity
recording software that came included with your
iConnex soundcard.
INSTALLING AND SETTING UP AUDACITY
Audacity is the software that is bundled with
the iConnex and allows you to record your old
RECORDS or TAPES, although we do not
manufacture the AUDACITY software we
have included it along with your iConnex as a
courtesy and convenience to our customers.
To install AUDACITY insert the disk into your
computers CD-ROM drive, go to your start
menu and open MY COMPUTER and choose
the AUDACITY CD. Open the AUDACITY
folder and choose SETUP this opens the
install wizard, follow the prompts and the
wizard will install AUDACITY and create an
ICON on your desktop. when the install
wizard finishes, look for the AUDACITY icon
on your desktop and click it this will open
AUDACITY.
AUDACITY is a freeware program and has no relation to
NOTICE:
iKey-Audio, any and all customer service issues should be
directed to AUDACITY at audacity.sourceforge.net.
ENGLISH
Check the Sound
control panel to make
sure that the input
and outputs are set
to USB codec.