iKEY-AUDIO iCONNEX Guía De Instalación Rápida página 5

iCONNEX
ENGLISH
COMPUTER SETUP
(cont.)
Once the program is open choose the EDIT pull
down menu and choose PROPERTIES. This will
open a PREFERENCES dialog box.
AUDACITY SETTINGS
Although the PREFERENCES box has 7 different
tabs you need to only worry about the first three.
Here is a brief overview of those settings:
AUDIO I/O
The Audio I/O tab is where you choose how
AUDACITY sends and receives audio for most
computers this is automaticaly set once you plug
in the iConnex sound card. These settings are as
follows:
AUDIO I/O
"Playback" Determines which output Audacity
will play out of. Choose Microsoft sound
manager if you wish for Audacity to play out of
your computers speakers. Or choose "USB
audio Codec" if you are going to be using the
iConnex soundcard as your output device.
"Recording" The "DEVICE" should be set to
"USB audio Codec" Audacity will then be set
to record from either the LINE or PHONO
input of the iConnex soundcard, depending on
which one you are using. "Channels should be
set to the default "2 (Stereo)" then there are
two extra features that can be chosen, the first
box "Play other tracks while recording new
one" should be UNCHECKED. The second
QUALITY
box "Software play through (play new track
while recording it)" should be CHECKED.
Once you have made these settings you can
click the next TAB.
QUALITY TAB
The "The Default Sample Rate" should be set
to 44.100Hz, the "Default Sample Format
should be 16-bit. Both the Real-time sample
rate converter, and the Real-time sample rate
converter should be set to "High-quality Sinc
Interpolation. Then also both the-real time
dither or the High-quality dither should be at
none.