Use In Accordance With Purpose; Scope Of Supply; Fitting The Guide Handle; Putting Into Operation - Brill RazorCut Premium 33 Instrucciones De Uso

Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 43

Use in accordance with purpose

The appliance is only intended for cutting lawns
and areas of grass in domestic gardens and
allotments.
Adherence to the instructions for use enclosed by
Brill-GLORIA is a precondition for the proper use
of the equipment. The instructions for use also
include the operating, care and maintenance
instructions.
We must expressly note that we do not
accept any liability under the product liability
act for any damages resulting from use for
any other purpose than the intended use,
incorrect operation or non-professional
repairs. In this case no guarantee will be
given!
The appliance is not intended for professional
purposes!

Scope of supply

Checking all the parts are Included:
The box contains the following parts:
– Hand lawnmower
– 1 upper section of the guide handle
– 1 middle section of the guide handle
– 2 lower section of the guide handle
– Assembly parts for the guide handle in a plastic
bag
– 1 thickness gauge
– 1 user's manual
16

Fitting the guide handle

A
B
Pictures
and
Insert the lower section of the guide handle (6)
through the opening of the unit as shown. The
boreholes on the lower section of the guide
handle (6) must be pushed over the handle
bolts.
Note!
The lower section of the guide handle can only
be pushed onto the handle bolts when the cut-
outs in the boreholes and the nose of the handle
bolts are over each other. Once both are over
each other, the handle will slide over the bolt and
is then secured in place.
Do not use force!
Repeat the process with the second lower sec-
tion of the guide handle on the opposite side.
C
Picture
Connect the components as shown from the
bottom upwards. To assemble, insert the frame
clamping screw (3) through the clamping part
(4) and the boreholes. Push the washer over the
frame clamping screw and hand-tighten the
screw with the clamping grip (2).

Putting into operation

Setting the cutting height
D
E
Pictures
and
Place the mower on a solid, flat surface. Stand
behind the mower so that you can place a foot
on the roller (12).
Loosen both lock nuts (8).
Using both hands, set the desired cutting
height with the adjusting handles (7).

Publicidad

Tabla de contenido

Solución de problemas

loading

Este manual también es adecuado para:

Razorcut premium 38

Tabla de contenido