Faucet Installation - Price Pfister ASHFIELD Serie Manual De Instrucciones

Thank you for purchasing this Price Pfister product. All Price Pfister products are carefully engineered, and factory tested to
provide long trouble-free use under normal conditions. This product is easy to install using basic tools and our easy to follow
illustrated instructions. If you have any questions regarding this product, call 1-800-Pfaucet (1-800-732-8238)
1 BEFORE PROCEEDING
WARNING: Read all the instructions completely before proceeding. Price
Pfister recommends calling a professional if you are uncertain about installing
this product!
This product should be installed in accordance with all local and state plumbing and
building codes.
2
2 SHUT OFF WATER SUPPLY
Locate water supply inlets and shut off the water supply valves. These are
usually found under the sink or near the water meter. If you are replacing an
existing faucet, remove the old faucet from the sink and clean the sink surface
thoroughly.
3
3 TOOLS RECOMMENDED
•PTFE plumber's tap •Plumber's putty
•Philips head screwdriver •Pliers
•Flashlight •Cloth
Your installation may require new supply lines and / or shut-off valves or other
additional tools.
4
E
D
4 CHECKING THE CONTENTS OF THE BOX
Upon opening the box, check to ensure that all of the following items are
included.
A Faucet D Putty Plate
B Lift Rod E Pop-Up Assembly
C Wingnuts (2x)
If any of these items are missing, please contact Price Pfister Consumer Service
at 1-800-Pfaucet (1-800-732-8238).
ENGLISH
•Slotted screwdriver
•Adjustable wrench
A
B
C
2

FAUCET INSTALLATION

5
5C
BOTTOM GROOVE
5A
5 FAUCET INSTALLATION
Ensure that the Plastic Putty Plate (5A) is pressed on the Deck Plate (5B).
Following manufacturer's recommendations on use, apply plumber's putty
into putty groove in bottom of Putty Plate (5A). Insert Faucet Shanks (5C)
through the end holes of the sink.
6
6A
6B
6 SECURING FAUCET
Align Faucet (6A) to sink surface. From underneath sink, secure Faucet using
Wingnuts (6B). Hand tighten.
5B
5C
6A
6B
6B