Intensity Control - NOVAFON Power Manual Del Usuario

Ocultar thumbs Ver también para Power:
Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 49
2.2.2. Disk attachment (for NOVAFON power, NOVAFON classic,
NOVAFON soft)
The disk attachment is designed for the treatment of larger body regions
that can be easily treated by using the device in a sweeping motion. The
disk attachment is included in the delivery. It can also be ordered as a
replacement part.
2.2.3. Ball attachment
The ball attachment can be used in the treatment of smaller target areas
and individual spots. It is included in the delivery, but it can also be or-
dered as a replacement part.
3. OPERATION
3.1. DEVICE START-UP
Plug the power plug into a power outlet that provides the specified volt-
age. Ensure that the cable is not stretched to a length of over 3 metres
as the cable might break. Use an extension cord, if required. Turn on the
NOVAFON device using the flip switch
. This flip switch is also used
to select the frequency level in the NOVAFON pro and power models
.

3.2. INTENSITY CONTROL

The intensity can be adjusted by turning the control knob
. Turning
the control knob clockwise (viewed from the top) reduces the intensity.
Consequently, turning the control knob counter-clockwise increases the
intensity. Please bear in mind that you need to turn the control knob
several times to reach the highest or lowest intensity. We recommend
that you start at a low intensity and then increase it as required and sub-
ject to individual sensitivity levels. Do not apply any pressure when using
the NOVAFON device. Instead of enhancing treatment effectiveness, this
would interfere with the vibratory performance. Perfect vibrations are
generated by the mere contact of the NOVAFON device with the skin.
3.3. ATTACHMENTS
The disk attachment and ball attachment attachments can be easily replaced.
Unscrew the attachment counter-clockwise to remove it or turn it clockwise
to tighten it.
7

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

ProClassicSoft

Tabla de contenido