Description Of The Parts - miniland baby warmy twin Manual Del Usuario

3. Allow the unit to cool off completely before putting it away.
4. Do not leave the baby bottle heater unattended whilst it is being used.
5. Always use the device with the original basket that was provided with it.
THIS UNIT MUST ONLY BE USED IN A DOMESTIC SETTING AND EXCLUSIVELY
BY ADULTS.
4. PRODUCT FEATURES

4.1. DESCRIPTION OF THE PARTS

1. Main body
2. Control panel
3. Measuring cup
4. AC plug
5. Heating basket
6. Hood
7. Hood handle
8. Rapid warming function
9. Temperature hold function
10. Sterilisation function
11. Time or temperature indicator
12. Selector to reduce
13. Selector to increase
14. Function/on button
5. INSTRUCTIONS FOR USE
5.1. SELECTING THE WORKING MODE
By default, when the device is switched on the rapid warming function (8) will be
selected, with the number of minutes of heating appearing on the screen (11), by
default set to this option.
In order to change the working mode, push the button 'ON' (14) as many times as
necessary until the LED indicator shows that the desired option has been selected from
among those available.
5.2. FUNCTION 1: RAPID WARMING (breast milk, water for formula or jars)
This device is suitable for heating of either one or two baby bottles or jars of baby food
simultaneously.
It is not recommended that you warm one baby bottle and a jar of baby food at the
same time, nor that you try to warm two baby bottles or jars of baby food whose volume
is not equal, since this could cause differences in the temperatures reached in each
container, with the possibility that the temperature in both receptacles is excessively
high.
In order to proceed with the heating, follow the steps detailed below:
1. Place the device on a suitably flat surface, making sure that it is out of the reach
of children.
2. Insert the AC plug (4) into an electrical socket.
3. Pour the volume of liquid stated in the guide tables into the heating tank according
to the temperature and volume of your baby bottles/jars of baby food.
4. Insert the heating basket (5) into the main body.
5. Place the receptacle(s) in their respective holes in the heating basket. Never pile
difference receptacles in the same hole in the basket.
13
ENGLISH