General Notes; Wall-Mounted Installation - Motostar LIVIMN-B-N Manual De Instalación

212
A
B
29
2
1
A
B
C

General Notes

Read the instructions carefully before beginning the installa-
•
83,5
tion and carry out the actions as specified by the manufacturer.
The installation, programming, commissioning and maintenance
•
of the product must only be carried out by qualified technicians,
properly trained in compliance with the regulations in force, inclu-
ding health and safety measures and the disposal of packaging.
The installer must ensure that the information for the user,
•
where there is any, is provided and delivered.
Before carrying out any cleaning or maintenance operation,
•
disconnect the devices from the power supply.
The equipment must only be used for the purpose for which
•
it was expressly designed.
The manufacturer declines all liability for any damage as a
•
result of improper, incorrect or unreasonable use.
This product complies with the relevant directives in force.
Decommissioning and disposal. Dispose of the packaging
and the device at the end of its life cycle responsibly, in com-
pliance with the laws in force in the country where the product
is used. The recyclable components are marked with a symbol
and the material's ID marker.
THE DATA AND INFORMATION SHOWN IN THIS MANUAL ARE TO
BE CONSIDERED AS SUBJECT TO CHANGE AT ANY TIME AND
WITHOUT THE NEED FOR ANY ADVANCE WARNING. MEASURE-
MENTS, UNLESS OTHERWISE INDICATED, ARE IN MILLIMETRES.
LIVIMN-B-N

Wall-mounted installation

Unfasten the equipment from the metal support by letting it run
smoothly along it after you have pressed the plastic catch A.
Fix the metal support to the round Ø 60 mm back-box BA
or the rectangular 503 back-box BB BC using the screws
provided and paying attention to the (TOP) direction indication.
The box must be installed at an appropriate height for the user.
Avoid tightening the screws too much.
Once the connections are made, hook the video terminal onto the
metal support CD.To unhook the unit from the metal support
press the plastic catch and lift the terminal E.
For recessed installation refer to the recessing kit manual.
C