Motostar LIVIMN-B-N Manual De Instalación página 4

Setting melodies
☞ All the programming stages described below must be carried out in sequence:
1- Going into Programming.
Press button 5 times in 5 secs.
A short beep confirms that you have entered programming mode.
2- Programming the melody associated with a call from the entry panel.
To listen to the melodies in sequence, press key .
To select the melody and exit programming, press key
To select the melody and continue with programming, press key
3- Programming the melody associated with a call from the front door.
To listen to the melodies in sequence, press key .
To select the melody and exit programming, press key
To select the melody and continue with programming, press key
4- Programming the number of rings for the call.
Press key as many times as you want it to ring (from 1 to 6 rings). Three seconds after the last press of the key the call selected for
the chosen number of rings will be played back.
To exit programming, press key
☞ See the entry panel documentation for call programming.
.
.
.
.
.