Linksys EtherFast Instant Broadband Serie Manual Del Usuario página 11

2. Static or Fixed IP Address
If your ISP says that you are connecting through a static or fixed IP address
from your ISP, perform these steps:
a. Select Static IP as the WAN Connection Type.
b. Enter the WAN IP Address.
c. Enter the Subnet Mask.
d. Enter the Gateway Address.
e. Enter the DNS in the 1, 2, and/or 3 fields. You must enter at least one DNS
address.
f. Click the Apply button to save the settings.
D
2
Screen for BEFSX41
18
®
Instant Broadband Series
EtherFast Cable/DSL Routers
®
3. PPPoE
If your ISP says that you are connecting through PPPoE or if you normally
enter a user name and password to access the Internet, perform these steps:
a. Select PPPoE as the WAN Connection Type.
b. Enter the User Name.
c. Enter the Password.
d. Click the Apply button to save the settings.
e. Click the Status tab, and then click the Connect button to start the con-
nection.
D
3
Screen for BEFSX41
19