La-Z-Boy XR Instrucciones De Operación página 6

PowerReclineXR
Assembly Instructions
6. Align the red heating pad connectors and push the connectors together until locked (F
7. Align the brown massage connector with the black massage connector and push the connectors
together until locked (F 8).
IGURE
8. Gently rotate the chair back to the upright position so it is resting on its base. Do not allow the motor
connector to be pinched between the frame and the floor.
9. Connect the power supply to the chair. Align the power supply connector to the motor connector
routed behind the chair (F 9). Push the connectors together until fully seated and close the
IGURE
locking cover to secure the connection.
10. Connect the 120 volt power cord to the power supply (F
in the Operating Instructions.
11. Proceed to the Battery Backup Assembly Instructions.
12. To remove the back, unplug the 120 volt power cord from the electrical outlet, and disconnect the
power supply connection behind the chair. Reverse the Assembly Instructions steps.
F 7
IGURE
Make this
connection
F 9
IGURE
Motor Connector
Make this
connection
Power Supply
10
with Massage & Heat
®
10). Do not plug in until instructed
IGURE
F 8
IGURE
Make this
connection
F 10
IGURE
Make this
connection
120 Volt Power Cord
7).
IGURE
( age intentionally left blank )
11