Danby Silhouette Renoir Manual De Instrucciones página 6

INSTALLATION INSTRUCTIONS
4. Install the mounting bracket.
• Using the guidelines on the paper template
and three screws, install the mounting bracket.
• The mounting bracket should be secured with
two separate screws each entering a stud.
• It is recommended to secure the bracket into
two separate wall studs.
• Use the included drywall anchors for added
stability.
5. Level the unit.
• Remove the pedestal cover from the front of the
unit by removing the two screws on either side.
• With the help of another person, place the unit
against the wall and plug it in.
6. Attach the unit to the mounting bracket.
• Firmly secure the unit to the mounting bracket
using two screws.
• If necessary, adjust the levelling legs to the
approrpiate height.
• Replace the pedestal cover.
• Ensure the main power switch, located on the
lower right side beneath the door, is turned to
the "ON" position.
4