NOTES:
1. During measurement of heart rate value, the
flash.
2. When the green light flashes on the front side of the de-
vice, no heart rate is measured. It stops flashing, if a value
is measured and no target value is set. If the light flashes
yellow and a beep is emitted every 10 seconds, the mea-
sured value is less than the minimum target heart rate. If
the light flashes red and two beeps can be heard every 10
seconds, the measured value is greater than the maximum
target heart rate. If a target value is set and the measured
value is within the target heart rate zone, the light will again
flashes green.
3. If no heart rate is measured for more than 1 minute, the
device will beep 3 times and the display will flash
Adjust your wearing position if necessary. If no pulse is de-
tected for over 2 minutes, a long beep can be heard and the
display looks as below. The device quits measurement
mode automatically.
- 61 -
UK
icon will
.