Product Safety Information; Product Specifications - Ingersoll Rand 6LH1 Especificaciones Del Producto

Product Safety Information

Intended Use:
These Air Drills are designed for drilling, honing, reaming and hole sawing.
For additional information refer to Product Safety Information Manual Form 04580353.
Manuals can be downloaded from ingersollrandproducts.com

Product Specifications

Models Style
6LH1 Lever
6LH1-EU Lever
6LJ1 Lever
6LJ1-EU Lever
6LJJ1 Lever
6LJJ1-EU Lever
6LK1 Lever
6LK1-EU Lever
6LL1 Lever
6LL1-EU Lever
6LR3 Lever
6LR3-EU Lever
† K = 3dB measurement uncertainty
pA
‡ K = 3dB measurement uncertainty
wA
Sound and vibration values were measured in compliance with internationally recognized test
standards. The exposure to the user in a specific tool application may vary from these results.
Therefore, on site measurements should be used to determine the hazard level in that specific
application.
Installation and Lubrication
Size air supply line to ensure tool's maximum operating pressure (PMAX) at tool inlet. Drain condensate
from valve(s) at low point(s) of piping, air filter and compressor tank daily. Install a properly sized Safety
Air Fuse upstream of hose and use an anti-whip device across any hose coupling without internal shut-
off, to prevent hose whipping if a hose fails or coupling disconnects. See drawing 16575599 and table
on page 2. Maintenance frequency is shown in a circular arrow and defined as h=hours, d=days, and
m=months of actual use. Items identified as:
1. Air filter
2. Regulator
3. Lubricator
4. Emergency shut-off valve
5. Hose diameter
6. Thread size
16572190_ed3
Free Chuck
Speed Capacity
rpm inch (mm)
6000 1/4 (6)
6000 1/4 (6)
5100 1/4 (6)
5100 1/4 (6)
3950 1/4 (6)
3950 1/4 (6)
3100 1/4 (6)
3100 1/4 (6)
2150 1/4 (6)
2150 1/4 (6)
500 3/8 (10)
500 3/8 (10)
Sound Level dB(A)
(ISO15744)
† Pressure (L )
p
76.3
76.3
80.0
80.0
77.7
77.7
74.3
74.3
74.0
74.0
71.8
71.8
* K = Vibration measurement uncertainty
WARNING
7. Coupling
8. Safety Air Fuse
9. Oil
10. Grease - during assembly
11. Grease - through fitting
Vibration (m/s²)
(ISO28927)
‡ Power (L ) Level
w
-- < 2.5
-- < 2.5
91.0 < 2.5
91.0 < 2.5
-- < 2.5
-- < 2.5
-- < 2.5
-- < 2.5
-- 4.8
-- 4.8
-- 4.8
-- 4.8
EN
*K
--
--
--
--
--
--
--
--
1.0
1.0
1.0
1.0
EN-1