Product Safety Information; Product Specifications - Ingersoll Rand 7804XP Especificaciones Del Producto

Product Safety Information

Intended Use:
These Drills are designed for driving fasteners and drilling.
For Additional information refer to Product Safety Information Manual
Form 04580353.
Manuals can be downloaded from www.ingersollrandproducts.com.

Product Specifications

Free Speed Chuck Capacity
Model Style
7804XP Pistol 1600 @ 90 psi
† K = 3dB measurement uncertainty
pA
‡ K = 3dB measurement uncertainty
wA
* K = Vibration measurement uncertainty
Installation and Lubrication
Size air supply line to ensure tool's maximum operating pressure (PMAX) at tool inlet. Drain
condensate from valve(s) at low point(s) of piping, air filter and compressor tank daily. Install a
properly sized Safety Air Fuse upstream of hose and use an anti-whip device across any hose
coupling without internal shut-off, to prevent hose whipping if a hose fails or coupling discon-
nects. See drawing 16573180 and table on page 2. Maintenance frequency is shown in circular
arrow and defined as h=hours, d=days, and m=months of actual use. Items identified as:
1. Air filter
2. Regulator
3. Lubricator
4. Emergency shut-off valve
5. Hose diameter
6. Thread size
Parts and Maintenance
When the life of the tool has expired, it is recommended that the tool be disassembled,
degreased and parts be separated by material so that they can be recycled.
The original language of this manual is English.
Tool repair and maintenance should only be carried out by an authorized Service Center.
Refer all communications to the nearest Ingersoll Rand Office or Distributor.
47132691_ed1
rpm in (mm)
1/4 (6.35)
Sound Level dB (A)
(ISO15744)
† Pressure (L ) ‡ Power (L
p
83.6
7. Coupling
8. Safety Air Fuse
9. Oil
10. Grease - during assembly
11. Grease - through fitting
EN
Vibration
(ISO28927)
m/s²
) Level *K
w
94.6 3.0 0.8
EN-1