SILENTRON 5143 Manual Del Usuario página 18

4.4 Change of password – new "administrator" mobile phone
At every time it is possible to substitute the security code (password) with a new one, provided that you know the old password. The mobile
phone sending the new password will become automatically the new "administrator".
4.5 Gate opening function (see 3.3.4)
When the gate opening function has been activated, the output relay works automatically in a monostable way, with an ON time lapse of 3
seconds, without any specific programming. Whatever of the 9 stored phone numbers activates the gate opening by simply calling the device.
This function is not possible with the "administrator" mobile phone.
To change the output relay activation time, see 3.3.10.
4.6 SIM expiry
If suitable programmed (drawing 10) the device sends an SMS at the SIM expiry date to all the numbers combined according to the K
combination (see 3.3.4).
4.7 Remaining credit
The function must be programmed according to the GSM provider (see 3.3.12 and 3.3.13). The information about remaining credit is
automatically sent after an alarm to all the numbers according to the combination K (see 3.3.4). Warning: in order to avoid malfunctioning
because of no remaining credit on the SIM card, we warmly suggest to have a contract where the SIM card is automatically charged with money
every time you reach a minimum credit.
4.8 Activation/deactivation of output relay (valid only if the gate opening function is not active)
This function can be automatically carried out by all the programmed phone numbers, except for the administrator one (position 0). To activate
the relay, call the device and enter 1 # after you listen to the acoustic signal: you hear a beep every time you press a button and 3 beeps at the
end of the operation carried out successfully. To deactivate the relay, enter 0 # : one beep will confirm the successful operation.
In case the relay has been programmed with timing, the activation operation will be enough: the deactivation will be automatic after the set time.
If the relay function has been given a name (label), the number calling will receive the confirmation of the requested operation with a SMS (see
relay programming 3.3.10).
18
SILENTRON - Made in Italy
COPYRIGHT SILENTRON DF5143X A070911GM