Connecting Your Computer - Bose SOUNDLINK Guía De Usuario

English TAB 2, 10

Connecting your computer

1. Make sure that the wireless source light on the
SoundLink™ speaker is flashing.
If not, press the remote wireless source button.
The wireless source light should start flashing.
2. Make sure your computer is on and all music applica-
tions are closed.
TAB 3, 11 TAB 4, 12
Wireless source light
Wireless
source
button
TAB 5, 13 TAB 6, 14
3. Lift the antenna on the SoundLink USB key to the
vertical position and plug it into a USB port on
your computer.
Confirm that the SoundLink USB key power light
turns on and starts flashing.
Antenna
Power light
and
Disconnect-reconnect button
4. Wait a few seconds for your computer to recognize
the SoundLink USB key. When ready, it will automati-
cally establish a wireless link with the SoundLink
speaker. This may take up to 20 seconds the first
time, much less after that.
TAB 7, 15 TAB 8, 16
S S
YSTEM ETUP
3