Technical Specifications; Safety Instructions; Instructions For Power Safety - Menzer SF 125 Traducción Del Manual Original

Dear customer,
By purchasing the MENZER SF 125 scouring
machine, you have selected a product of the
highest quality. We would hereby like to express
our gratitude for the trust you have shown in us
and our tools.
Before using your power tool for the first time,
please take the time to read the operating and
safety instructions on the following pages. Close
observance of the instructions given here will
ensure an optimal result for your work. The safety
warnings are intended to protect you from acci-
dents that could be caused by improper use of the
scouring machine.
The user of this scouring machine is strongly
advised to acquaint him or herself with the ma-
chine's design, technical requirements, operating
procedures for safe use, correct maintenance and
repair procedures and the storage and application
instructions which are described here. The opera-
tor of this machine uses it at his or her own risk
and assumes full responsibility for doing so. These
instructions should be kept and used for future
reference.
The MENZER-Team

1. Technical specifications

Model: MENZER SF 125
Voltage: 230 V ~ 50 Hz / 110 V ~ 50 Hz
Power consumption: 1,500 W
No-load rotation speed: approx. 4,500 min
Scouring head diameter: Ø 125 mm
Weight: 4.5 kg

2. Safety instructions

The MENZER SF 125 Scouring Machine is designed
for renovation work and is suitable for grinding
off plaster and removing paints, varnishes and
cements. The machine can also be used for roug-
hening surfaces, levelling screed and removing
stubborn epoxy resins. It is also specially designed
for use in conjunction with an industrial vacuum
cleaner for removing fine dust particles from your
working environment.
Be sure to wear ear protection if the noise level
exceeds 85 dBA!

2.1 instructions for power safety

• This machine may be connected ONLY to sockets
that provide the operating voltage displayed on
the machine's identification label, and that are
grounded in accordance with all applicable regula-
tions.
• Make sure the power switch is in the OFF posi-
tion before you insert the power connector into
the power socket.
• Avoid physical contact with grounded surfaces
such as pipes, radiators, stoves and refrigerators.
There is a high risk of receiving an electric shock if
your body is grounded.
• Do not allow the scouring machine to come into
contact with water, e.g. rain or other wetness or
dampness. Water that seeps in could cause the
machine to short-circuit, and damage it irrepara-
bly. Furthermore, this poses the risk of an electric
shock for the user.
• Keep the power cable away from the scouring
head so that no damage is caused to the cable's
insulation. Never attempt to make alterations to
the plug connector or other machine parts with
electrical contact.
• Should you need to use an extension cable, it
must have an adequate conductor cross-section
(2,5 mm ) to prevent voltage drop or overheat-
2
ing. If you intend to use the scouring machine
outdoors, the extension cable you use must also
be suitable for outdoor use.
-1
• Do not use the power cable as a means of car-
rying or hanging the scouring machine. Do not
pull on the cable when you wish to disconnect the
scouring machine from the power supply. Keep
the cable away from sharp edges, heat and oil.
• If the power cable is damaged, have it replaced
by a trained professional. Do not attempt to use
the scouring machine when there are signs of
damage to the cable.
EN 3