SystemRoMedic OneWaySlide Manual De Usuario página 3

OneWaySlide
SystemRoMedic
TM
OneWaySlide is used for repositioning farther back and sideways in a chair/wheelchair. OneWaySlide is designed to glide
easily backward, but not forward. To make manoeuvring easier for caregivers, OneWaySlide features handles on both
sides and at the back. It is placed so that the user remains sitting on it. OneWaySlide is available in several sizes.
Check Safety
Visual inspection
Check the condition and function of the assistive device regularly. Always inspect the product after laundering. Check to
ensure that seams and material are free from damage. Check to ensure that fabric is not worn or faded. If there are signs
of wear, the product must be discarded.
Mechanical load
Apply pressure to buckles and handles and verify that
they will not open or break under heavy loads.
Always read the user manual
Always read the user manuals for all assistive devices used during a transfer.
Keep the user manual where it is accessible to users of the product.
Always make sure that you have the right version of the user manual.
The most recent editions of user manuals are available for downloading from our website, www.directhealthcaregroup.com.
Placement of OneWaySlide
Place OneWaySlide so that the open section is facing the
back of the wheelchair. Place the upper section so that
it sticks up a bit on the backrest of the wheelchair. This
makes it easier for the caregiver to reach the handles.
SystemRoMedic
M A N U A L
TM
Friction test
Low friction - Ensure that the surface is smooth and slides
effortlessly. Compare with a new product.
High friction - Ensure that the surface is rough and prevents
the transfer aid from moving. Compare with a new product.
Tie the OneWaySlide to the rear frame tubing of
the wheelchair.
English
3