Mopar 4280267 Manual De Instrucciones página 10

10
33. Gently pry on both sides of the instrument panel air
outlet vent (1) using Trim Stick C­4755 (2) or equiva­
lent until the air outlet snap clip retainers are released
from the face of the instrument panel (3).
34. Gently pull the air outlet vent (1) from the instrument
panel (3).
35. Remove the adhesive backing on one side and apply
the two sided tape (1) to the bottom of the remote start
antenna (2).
36. Press the tape (1) firmly for 30 seconds.
37. Using a fish tape or equivalent, route the antenna har­
ness (3) down through the opening near the air condi­
tioner ducts towards the WIN module.
38. Remove the remaining adhesive backing from the two
sided tape and place the remote start antenna (1) to
the top of the air conditioner/heating duct (2). Press
down firmly for 30 seconds to allow for proper adhe­
sion.
Jan 11, 2010
4280267
K6860946