Adjusting The Feed - TYROLIT Hydrostress FSG620 Serie Manual De Instrucciones

TYROLIT Hydrostress AG

6.8 Adjusting the feed

Page 16
Symbol
Feed adjuster (1) is in the neutral position
Footbrake (2) is released
1. Place coupling lever (3) in the coupled position.
2. Using the feed adjuster (1), set the direction of travel and speed.
Significance
Coupling lever in coupled position
Coupling lever in uncoupled position
Feed adjuster in the forwards direction of travel
Feed adjuster in the backwards direction of travel
Floor Saw FSG620