Grease Nipples - TYROLIT Hydrostress FSG620 Serie Manual De Instrucciones

7 Maintenance

7.1 Grease nipples

Floor Saw FSG620
When?
Daily
Weekly
Every 50 hours of operation
Annually or every 100 operating hours
According to the information from the motor
manufacturer
Position of grease nipples
1 Blade drive shaft: 2 items
2 Wheel drive shaft bearing: 2 items
TYROLIT Hydrostress AG
What?
► Check oil level.
► Perform a visual check for damage.
► Check belt and chain tension and adjust as
necessary.
► Lubricate grease nipples.
► Arrange a major service by TYROLIT
Hydrostress AG or an authorised
representative.
► Carry out all necessary measures in
accordance with the operating instructions of
the motor manufacturer.
Page 17