Inspection And Service - EUCHNER NMVZ Serie Manual De Instrucciones

Operating Instructions Safety Switch NM..VZ
Figure 4: Dimension drawing NM11VZA / NM02VZA / NM12VZA / NM03VZA
Figure 5: Dimension drawing NM01VZA, NM...C2069
Fig. 6: Minimum approach radius: The pivot point of the door must lie in the plane of the entry opening for the actuator
Insertion depth
+4
20
A
0,4
*
17
∅ 5
∅ 4,2
M=0,6Nm
16,5 * fixed positioning
18
M16x1,5
M16x1,5
12,5
25
25
32
D
M=0,6Nm
0,8 B
B
C
A
3
M=0,6Nm
Standard
7
B
Insertion depth
+4
20
A
0,4 A
17 *
∅ 5
∅ 4,2
* fixed positioning
16,5
18
12,5
M16x1,5
25
25
32
D
M=0,6Nm
0,8 B
B
C
A
3
Standard
7
M=0,6Nm
B
A
for safety-related
applications (M5)
for safety-related
applications (M5)

Inspection and service

If damage or wear is found, the complete switch
and actuator assembly must be replaced.
Replacement of individual parts or assemblies
is not permitted!
No servicing is required, but regular inspection of
the following is necessary to ensure trouble-free long-
term operation:
correct switching function
secure mounting of components
dirt and wear
sealing of cable entry
loose cable connections.
Note:The year of manufacture can be seen in the
bottom, right corner of the rating plate.
Exclusion of liability under the following
circumstances
incorrect use
non-compliance with safety regulations
installation and electrical connection not performed
by authorized personnel.
failure to perform functional checks.
EC declaration of conformity
The manufacturer named below herewith declares that
the product fulfills the provisions of the directive(s)
listed below and that the related standards have been
applied.
EUCHNER GmbH + Co. KG
Kohlhammerstraße 16
70771 Leinfelden-Echterdingen, Germany
Directives applied:
Machinery directive 2006/42/EC
Standards applied:
EN 60947-5-1:2004 + Cor.:2005 + A1:2009
EN 1088:1995+A2:2008
Leinfelden, July 2010
Dipl.-Ing. Michael Euchner
Director
Duc Binh Nguyen
Authorized representative empowered to draw up
documentation
The signed EC declaration of conformity is included
with the product.